|
Description:
D-Link xStack DGS-3627
The xStack DGS-3600 series of next generation Layer 3 Gigabit switches delivers performance, flexibility, security, multi-layer QoS and access, and redundant power option for SMB and enterprises. With high Gigabit port densities, SFP support, 10-Gigabit uplink options and advanced software functions, these switches can act as departmental access layer devices or core switches to form a multi-level network structured with high-speed backbone and centralized servers. Telecom service providers can also take advantage of the high SFP density switches to form the core of their Fiber to the building (FTTB) network that extends to the subscribers' sites.
Easy to deploy and simple to managed, the DGS-3600 series can be stacked with any switches supporting D-Link's Single IP Management to form a multi-level network structured with backbone and centralized high-speed servers. This virtual stack can comprise units located anywhere on the same network domain, and uses the optional 10- Gigabit uplinks to move intra-stack traffic at 20Gbps full duplex. It can eliminate single points of failures, cable distance barriers, physical stacking method limitations and the need for stacking cabling.
The DGS-3600 series provides a complete set of security features, which includes L2/L3/L4 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers. In addition, it offers suppression capabilities and Layer 3 IP v4/v6 Static Routing to increase network performance and security. Built-in D-Link ZoneDefense technology allows business to integrate the switch stack with D-Link NetDefend firewalls to implement a full coverage, proactive security architecture.
The DGS-3600 series offers extensive VLAN support including GARP/GVRP and 802.1Q VLAN to enhance security and performance. To support converged applications including VoIP, ERP, Intranet and video conference, a robust set of L2/L3/L4 QOS/CoS features ensures that critical network services are served with proper priority. To prevent malicious flooding traffic caused by worm/virus infections, the DGS-3600 series provides D-Link Safeguard Engine to increase the switch's reliability, serviceability and availability. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for end users. For advanced applications, per-flow bandwidth control allows easy fine-tuning of service types based on specific IP addresses or protocols.
Features:
Fully Supports IPv6 Routing
24-Gigabit Ports Plus Four SFP Combo Slots and Three 10Gig Uplink Ports
Brings Advanced Enterprise Network Management Features to a Cost-Effective Level
sFlow® Function Enables Wire-Speed Traffic Monitoring to Collect Real-Time and In-Depth Data
Technical Information:
General
Device Type Switch - stackable
Enclosure Type External - 1U
Installed Modules Qty (Max) 0 (installed) / 3 (max)
Approximate Width 17.4 in
Approximate Depth 15.3 in
Approximate Height 1.7 in
Approximate Weight 12.1 lbs
Memory
RAM 2 MB
Networking
Ports Qty 24 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
Max Units In A Stack 12
Data Transfer Rate 1 Gbps
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Routing Protocol RIP-1, RIP-2, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, static IP routing, PIM-DM, IGMPv3
Remote Management Protocol SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP
Connectivity Technology Wired
Switching Protocol Ethernet
MAC Address Table Size 16K entries
Features Layer 3 switching, layer 2 switching, IP-routing, DHCP support, BOOTP support, VLAN support, IGMP snooping, traffic shaping, port mirroring, IPv6 support, Access Control List (ACL) support
Compliant Standards IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1v
Expansion / Connectivity
Expansion Slots Total (Free)
4 ( 4 ) x SFP (mini-GBIC)
3 ( 3 ) x expansion slot
Interfaces
24 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
1 x management - console
Miscellaneous
Encryption Algorithm SSL 3.0
Authentication Method RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Compliant Standards CE, FCC Class A certified, VCCI, C-Tick, cUL, CB
Power
Power Device Power supply - internal
Voltage Required AC 120/230 V ( 50/60 Hz )
Power Consumption Operational 72.3 Watt
Features Redundant Power System (RPS) connector
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 10 - 90%
Every effort has been made to ensure the accuracy of all information contained herein. Mwave.com makes no warranty expressed or implied with respect to accuracy of the information, including price, product editorials or product specifications. Product and manufacturer names are used only for the purpose of identification.
|
Shopping cart 
